• head_banner

Top Suppliers Hydraulic Swing Hoist - Excavator Hydraulic Cylinder – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for Dump Truck Hydraulic Cylinder , Hydraulic House Jack System , Hollow Piston Hydraulic Cylinder , Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation and sincerely welcome you to join us.
Top Suppliers Hydraulic Swing Hoist - Excavator Hydraulic Cylinder – Xinrun Detail:

Product Detail

1.Excavator series of double acting single bucket type hydraulic cylinder is used as reciprocating linear motion actuator in excavator hydraulic system. PC series hydraulic cylinder is a kind of excavator hydraulic cylinder product specially researched and manufactured by Komatsu and Kayaba technology of Japan. It has the characteristics of high working pressure, reliable performance, convenient installation and disassembly, easy maintenance and buffer device. All seals of this series of hydraulic cylinder are imported seals. The surface of piston rod is hardened and plated with hard chromium, and the roughness after polishing can reach Ra0.08, The cylinder head absorption Kayaba technology is specially developed according to the working conditions of excavators. The material is ductile iron, and the two ends are buffered by floating buffer. It has good cushioning performance. It is mainly used for loose PC series hydraulic excavators and other hydraulic excavators produced at home and abroad.

17ae773082db306eb515c518d221797 773590aa46ff445876622c749ddcfd2

2. Design features of excavator hydraulic cylinder:

A.The piston rod is made of precision ground high-strength alloy steel. The surface of the piston rod is quenched with medium frequency to the maximum hardness of HRC62. The piston rod surface is plated with hard inscription and polished to provide an impact resistant surface to prevent the piston from pulling and bumping, Extended seal life has a safety factor of at least 5 times the tensile strength at rated pressure at the minimum cross section of the piston rod and piston assembly.

B.  The guide sleeve is made of ductile iron according to the excavation site. It is made of nodular cast iron and has high wear resistance. It is equipped with sliding bearing imported from Japan. The maximum bearing pressure of the bearing is 270n / mm2, the dynamic load is 140n / mm2, the maximum speed is 5m / s, the friction coefficient is 0.02 ~ 0.07, the working temperature is – 200 ° C to 280 ° C, and the guiding area reduces the stress to the maximum to withstand large lateral load, Extend the life of both cylinder and seal.

C. The piston rod seal is composed of dust ring, piston rod seal ring and hydraulic buffer, which can effectively prevent hydraulic oil leakage of piston rod. The dust ring is a double lip dust-proof ring. Its function is to prevent dust, dirt, sand and metal chips from entering. It greatly prevents scratch, protects the guide element and prolongs the service life of the seal. The medium oriented sealing lip reduces the remaining oil film. The polyurethane material ensures excellent characteristics in dry friction and increases wear resistance, Due to its good resistance to ozone and radiation caused by climatic conditions, the service life is prolonged. The working temperature is from – 35 ° C to 100 ° C, and the surface velocity is less than 2 m / s. The main sealing ring of piston rod is a lip type seal with two sealing lips and a tight fit at the outer diameter. Due to the additional lubricant between the two lips, it greatly prevents dry friction and wear, resists impact and extrusion, and improves the sealing performance under zero pressure. The working pressure is 40MPa, the working temperature is – 35 to 110 ℃, and the surface velocity is less than 0.5m/s. The function of hydraulic buffer is to absorb the impact and fluctuating pressure under high load, isolate high temperature fluid, and improve the durability of seals. The peak pressure can reach 100MPa. Due to the special shape groove on the sliding lip which can release back pressure, it can eliminate the pressure between the sealing ring and the buffer of the movable buttress rod, and transfer the pressure formed between the main seal and the buffer seal back to the system.

D. The cylinder bore is made of alloy steel 27SiMn with high strength, small shape and light weight, honed and rolled to a high surface finish, so as to minimize the internal friction and prolong the service life of the seal.

E. The standard piston is a casting with two concentricity fits with the piston rod. The piston is firmly locked by the screw thread between the nut and the piston nut, so as to ensure the reliable work under high pressure and parts. All piston seals are imported Parker and NOK products. Both ends of the piston are installed with a 4 mm thick dirt ring made of PTFE. As it has the function of impurity immersion, the oil can be prevented from being damaged due to mixing with external substances, so as to ensure that the seal has a long service life and can play a guiding and supporting role. The supporting ring has high pressure bearing capacity, which can eliminate all metal to metal contact between piston and cylinder block, provide high lateral bearing capacity, absorb impact, increase contact area and avoid scratching cylinder block. The piston seal adopts Pak’s open type OK seal, which has the advantages of resistance to impact load, low friction resistance and simple installation. Due to the special material performance of the seal ring, it has strong anti extrusion ability under high pressure and large clearance, and the working pressure is as high as 50MPa.

F.The buffer sleeve with rod cavity is a centering sleeve, which can automatically adjust the concentricity, and because there is a large gap between the buffer sleeve and the piston, the starting pressure can be reduced. The buffer plunger adopts steel ball limit, which can float. The buffer sleeve and buffer plunger have floating characteristics. Therefore, it can have a very small buffer gap, automatically align the center and eliminate the influence of coaxial shaft error. The buffer performance is good, which can reduce the noise and impact load and prolong the service life of the machine.

Application

Excavator Hydraulic Cylinder
Excavator Hydraulic CylinderExcavator Hydraulic Cylinder


Product detail pictures:

Top Suppliers Hydraulic Swing Hoist - Excavator Hydraulic Cylinder – Xinrun detail pictures

Top Suppliers Hydraulic Swing Hoist - Excavator Hydraulic Cylinder – Xinrun detail pictures


Related Product Guide:

We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Top Suppliers Hydraulic Swing Hoist - Excavator Hydraulic Cylinder – Xinrun , The product will supply to all over the world, such as: Honduras, Philadelphia, Sudan, We have top engineers in these industries and an efficient team in the research. What is more, we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.
  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Eartha from Uruguay - 2017.06.29 18:55
    Perfect services, quality products and competitive prices, we have work many times, every time is delighted, wish continue to maintain!
    5 Stars By Maureen from Argentina - 2017.07.28 15:46
    Write your message here and send it to us

    Related products

    • Fast delivery Long Ram Hydraulic Flat Bottom Jack - Hydraulic Bottle Jack – Xinrun

      Fast delivery Long Ram Hydraulic Flat Bottom Ja...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Personlized Products Hydraulic Cylinder Pressure - Truck Telescopic Hydraulic Cylinder – Xinrun

      Personlized Products Hydraulic Cylinder Pressur...

      Product Detail 1.Telescopic hydraulic cylinder is also called multi-stage hydraulic cylinder. It is composed of two or multi-stage piston cylinders, mainly composed of cylinder head, cylinder barrel, sleeve, piston and other parts. There are inlet and outlet ports a and B at both ends of the cylinder barrel. When the oil enters port a and oil returns from port B, the first stage piston with larger effective area is pushed, and then the smaller second stage piston moves. Because the flow rate ...

    • Factory Price Cheap Hydraulic Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun

      Factory Price Cheap Hydraulic Cylinder - Hydra...

      Product Detail Hydraulic flap is a kind of modern material unloading equipment. As long as it is backed up, it can automatically and directly unload materials. The unloading efficiency is very high and the dust is less. The dumper needs to start the hydraulic station motor to make the pressure arm rise to a high position, and then a fully loaded gondola car is pulled by the heavy wagon shunting machine, and it is located on the car supporting beam of the dumper. The back plate vibrator is pus...

    • Professional China Rv Hydraulic Leveling Jacks - Car Jack – Xinrun

      Professional China Rv Hydraulic Leveling Jacks ...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • 2020 New Style Hydraulic Small Jack - Hydraulic Bottle Jack – Xinrun

      2020 New Style Hydraulic Small Jack - Hydrauli...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Factory making Dual Hydraulic Cylinder - Truck Telescopic Hydraulic Cylinder – Xinrun

      Factory making Dual Hydraulic Cylinder - Truck...

      Product Detail 1.Telescopic hydraulic cylinder is also called multi-stage hydraulic cylinder. It is composed of two or multi-stage piston cylinders, mainly composed of cylinder head, cylinder barrel, sleeve, piston and other parts. There are inlet and outlet ports a and B at both ends of the cylinder barrel. When the oil enters port a and oil returns from port B, the first stage piston with larger effective area is pushed, and then the smaller second stage piston moves. Because the flow rate ...