• head_banner

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Hydraulic Cylinder Rod End , Double Rod Hydraulic Cylinder , Hydraulic Press Cylinder , Therefore, we can meet different inquiries from different clients. Please find our website to check more information from our products.
OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun Detail:

Product Detail

1.Structure of scissor jack
It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed.

2.Principle of scissor jack
The scissor jack is based on the geometric principle that the two waists of isosceles triangle do not change and shorten the bottom edge will raise the high line. It uses screw rod and nut to adjust the bottom edge of the upper and lower isosceles triangle to raise and lower the height. Just like the tool ladder in ordinary life, when the angle between the two arms of a ladder is smaller, the ladder will be higher. Similarly, the greater the angle between the two arms of a ladder, the lower the ladder will be. Scissor jack, also known as bracket jack, is light and fast, and it is a product attached to the car of major automobile factories in China. The utility model is composed of an upper supporting rod and a lower supporting rod made of metal plates. The cross section of the upper strut and the cross section of the lower strut at the tooth and its vicinity are rectangular with one side open, and the metal plates on both sides of the opening bend inward. The teeth on the upper and lower struts are made of metal plates bent on both sides of the opening, and the tooth width is larger than the thickness of the metal plate.

3.The purpose of scissor jack is suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity. As the shear Jack belongs to mechanical jack, there is no need to worry about the phenomenon of oil leakage, but also can be used horizontally.

4.Model of scissor jack

model Capacity(ton) Min.height(mm) Max.Height(mm) N.W(kg) QTY/CTN(pcs) SIZE(mm)
KJ006 0.6 45 345 1.6 10 375x100x70
KJ008 0.8 110 320 1.7 10 375x100x70
KJ010 1 105 350 1.9 10 375x100x70
KJ015 1.5 110 390 2.2 10 440x110x105
KJ020 2 100 470 2.1 10 440x110x105

Application

Scissor jack is a kind of classification of Jack. It is called scissors jack because of its structure and shape. Scissor jack is a kind of lifting equipment, which is mainly used to jack up and support cars with small tonnage such as cars. It is light and fast to use. It is more suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity.


Product detail pictures:

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun detail pictures

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun detail pictures

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun detail pictures

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun detail pictures

OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun detail pictures


Related Product Guide:

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for OEM/ODM China Hydraulic Camper Jacks - Car Jack – Xinrun , The product will supply to all over the world, such as: Oslo, Czech Republic, Leicester, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
  • The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
    5 Stars By Nydia from Bolivia - 2017.03.07 13:42
    A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Megan from Greek - 2018.07.12 12:19
    Write your message here and send it to us

    Related products

    • Best quality Hydraulic Body Jack - Hydraulic Bottle Jack – Xinrun

      Best quality Hydraulic Body Jack - Hydraulic B...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Wholesale Price Sing Acting Hydraulic Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun

      Wholesale Price Sing Acting Hydraulic Cylinder ...

      Product Detail Hydraulic flap is a kind of modern material unloading equipment. As long as it is backed up, it can automatically and directly unload materials. The unloading efficiency is very high and the dust is less. The dumper needs to start the hydraulic station motor to make the pressure arm rise to a high position, and then a fully loaded gondola car is pulled by the heavy wagon shunting machine, and it is located on the car supporting beam of the dumper. The back plate vibrator is pus...

    • Hot sale Custom Made Hydraulic Cylinders - Truck Telescopic Hydraulic Cylinder – Xinrun

      Hot sale Custom Made Hydraulic Cylinders - Tru...

      Product Detail 1.Telescopic hydraulic cylinder is also called multi-stage hydraulic cylinder. It is composed of two or multi-stage piston cylinders, mainly composed of cylinder head, cylinder barrel, sleeve, piston and other parts. There are inlet and outlet ports a and B at both ends of the cylinder barrel. When the oil enters port a and oil returns from port B, the first stage piston with larger effective area is pushed, and then the smaller second stage piston moves. Because the flow rate ...

    • Manufacturer of Hydraulic Cylinder Clevis - HSG01-E Series Hydraulic Cylinder – Xinrun

      Manufacturer of Hydraulic Cylinder Clevis - HS...

      Product Detail HSG type engineering hydraulic cylinder is a double acting single rod piston type hydraulic cylinder, which has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffer device and various connection modes. It is mainly used in construction machinery, transportation, shipping, lifting machinery, mining machinery and other industries.    Research and Design 1.Our company has 6 engineers with 20 years, 40 years of...

    • China wholesale Heavy Duty Truck Brake Lining - Truck Brake Lining – Xinrun

      China wholesale Heavy Duty Truck Brake Lining -...

      Product Detail 1.Weirun has a complete and scientific management system for automobile parts and components. Shandong weirun Auto Parts Co., Ltd. is recognized by the industry for its integrity, strength and product quality. Welcome friends from all walks of life to visit, guide and business negotiation. Our company is a professional friction material production company. The main products are various types of brake linings. It is suitable for all kinds of minitype, light and heavy-duty specia...

    • Super Lowest Price Hydraulic Hoist Working - Truck Telescopic Hydraulic Cylinder – Xinrun

      Super Lowest Price Hydraulic Hoist Working - T...

      Product Detail 1.Telescopic hydraulic cylinder is also called multi-stage hydraulic cylinder. It is composed of two or multi-stage piston cylinders, mainly composed of cylinder head, cylinder barrel, sleeve, piston and other parts. There are inlet and outlet ports a and B at both ends of the cylinder barrel. When the oil enters port a and oil returns from port B, the first stage piston with larger effective area is pushed, and then the smaller second stage piston moves. Because the flow rate ...