• head_banner

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for 3 Stage Hydraulic Cylinder , Multi Stage Hydraulic Cylinder , Air Powered Hydraulic Ram , Because we stay in this line about 10 years. We got best suppliers support on quality and price. And we had weed out suppliers with poor quality. Now many OEM factories cooperated with us too.
Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun Detail:

Product Detail
The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small piston is pressed by the lever The force increases.

The area of the large piston is larger than that of the small piston. The oil pressure generated by hand is squeezed into the large piston. According to Pascal’s principle, the area ratio of large and small pistons is the same as the pressure ratio. In this way, the force on the hand increases from the wrench to the small piston, and the force from the small piston to the large piston increases. When working, just pull the handle back and forth.

It makes the manual oil pump continuously press oil into the oil cylinder. Because of the increasing oil pressure in the oil cylinder, it forces the piston and the weight above the piston to move upward together. Open the oil return valve, the high-pressure oil in the oil cylinder will flow back to the oil storage chamber, so the weight and piston will fall together.
Hydraulic jack is a kind of tool which uses plunger principle to lift equipment. It can be divided into two categories: one is integral bottle jack, the other is split hydraulic jack. The integrated design of integral bottle jack is divided into hydraulic jack and screw jack according to the driving principle, which is controlled by manual pressure or rocking pressure bar.

Application
Hydraulic jack is widely used in construction engineering, shipbuilding, metallurgy, mining, petrochemical, railway engineering, bridge erection, factory, warehouse, wharf, stack weight, automobile tire and tractor track replacement, and can also be used for hull keel installation or welding.


Product detail pictures:

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun detail pictures


Related Product Guide:

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Manufacturer of Sliding Hydraulic Center Jack - Hydraulic Bottle Jack – Xinrun , The product will supply to all over the world, such as: Belize, Congo, California, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
  • We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
    5 Stars By Elaine from Accra - 2018.06.05 13:10
    The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Helen from Florida - 2018.02.21 12:14
    Write your message here and send it to us

    Related products

    • Factory source Professional Hydraulic Jacks - Car Jack – Xinrun

      Factory source Professional Hydraulic Jacks - ...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • 2020 Good Quality Long Ram Hydraulic Jack - Hydraulic Bottle Jack – Xinrun

      2020 Good Quality Long Ram Hydraulic Jack - Hy...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • PriceList for Industrial Hydraulic Jack - Car Jack – Xinrun

      PriceList for Industrial Hydraulic Jack - Car ...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • Factory wholesale 2 Stage Hydraulic Cylinder - Loader Hydraulic Cylinder – Xinrun

      Factory wholesale 2 Stage Hydraulic Cylinder -...

      Product Detail 1.It is mainly us   ed for large and medium-sized excavators. It is suitable for the conditions of the maximum pressure of 350 kgf / cm ^ 2 and the temperature of – 20 ℃ – 100 ℃ (the specification of cold area is – 40 ℃ – 90 ℃). Main Features 2.a. Small size, light weight and high strength: the material selection, processing technology and welding technology of the cylinder body and piston rod are adopted according to the strength, fatigue design and ad...

    • Cheap PriceList for 500 Ton Hydraulic Jack - Car Jack – Xinrun

      Cheap PriceList for 500 Ton Hydraulic Jack - C...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • High Performance Two Way Hydraulic Cylinder - Excavator Hydraulic Cylinder – Xinrun

      High Performance Two Way Hydraulic Cylinder - ...

      Product Detail 1.Excavator series of double acting single bucket type hydraulic cylinder is used as reciprocating linear motion actuator in excavator hydraulic system. PC series hydraulic cylinder is a kind of excavator hydraulic cylinder product specially researched and manufactured by Komatsu and Kayaba technology of Japan. It has the characteristics of high working pressure, reliable performance, convenient installation and disassembly, easy maintenance and buffer device. All seals of this...