• head_banner

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our commission should be to provide our customers and consumers with ideal top quality and aggressive portable digital products for Mobile Hydraulic Jack , Telescopic Hydraulic Jack , Hydraulic Power Jack , The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.
Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun Detail:

Product Detail

1.Structure of scissor jack
It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed.

2.Principle of scissor jack
The scissor jack is based on the geometric principle that the two waists of isosceles triangle do not change and shorten the bottom edge will raise the high line. It uses screw rod and nut to adjust the bottom edge of the upper and lower isosceles triangle to raise and lower the height. Just like the tool ladder in ordinary life, when the angle between the two arms of a ladder is smaller, the ladder will be higher. Similarly, the greater the angle between the two arms of a ladder, the lower the ladder will be. Scissor jack, also known as bracket jack, is light and fast, and it is a product attached to the car of major automobile factories in China. The utility model is composed of an upper supporting rod and a lower supporting rod made of metal plates. The cross section of the upper strut and the cross section of the lower strut at the tooth and its vicinity are rectangular with one side open, and the metal plates on both sides of the opening bend inward. The teeth on the upper and lower struts are made of metal plates bent on both sides of the opening, and the tooth width is larger than the thickness of the metal plate.

3.The purpose of scissor jack is suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity. As the shear Jack belongs to mechanical jack, there is no need to worry about the phenomenon of oil leakage, but also can be used horizontally.

4.Model of scissor jack

model Capacity(ton) Min.height(mm) Max.Height(mm) N.W(kg) QTY/CTN(pcs) SIZE(mm)
KJ006 0.6 45 345 1.6 10 375x100x70
KJ008 0.8 110 320 1.7 10 375x100x70
KJ010 1 105 350 1.9 10 375x100x70
KJ015 1.5 110 390 2.2 10 440x110x105
KJ020 2 100 470 2.1 10 440x110x105

Application

Scissor jack is a kind of classification of Jack. It is called scissors jack because of its structure and shape. Scissor jack is a kind of lifting equipment, which is mainly used to jack up and support cars with small tonnage such as cars. It is light and fast to use. It is more suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity.


Product detail pictures:

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun detail pictures

Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun detail pictures


Related Product Guide:

Sticking for the perception of "Creating goods of high quality and making good friends with people today from all around the world", we constantly set the interest of shoppers to begin with for Manufacturer of Sliding Hydraulic Center Jack - Car Jack – Xinrun , The product will supply to all over the world, such as: Ethiopia, panama, Paraguay, we sincerely hope to establish a good and long-term business relationship with your esteemed company through this opportunity, based on equality, mutual benefit and win-win business from now to the future. "Your satisfaction is our happiness".
  • Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Eric from Singapore - 2017.12.02 14:11
    The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Matthew from Malaysia - 2018.06.03 10:17
    Write your message here and send it to us

    Related products

    • 2020 Good Quality Dump Truck Hydraulic Cylinder - Excavator Hydraulic Cylinder – Xinrun

      2020 Good Quality Dump Truck Hydraulic Cylinder...

      Product Detail 1.Excavator series of double acting single bucket type hydraulic cylinder is used as reciprocating linear motion actuator in excavator hydraulic system. PC series hydraulic cylinder is a kind of excavator hydraulic cylinder product specially researched and manufactured by Komatsu and Kayaba technology of Japan. It has the characteristics of high working pressure, reliable performance, convenient installation and disassembly, easy maintenance and buffer device. All seals of this...

    • Bottom price Excavator Thumb Hydraulic Cylinder - Loader Hydraulic Cylinder – Xinrun

      Bottom price Excavator Thumb Hydraulic Cylinder...

      Product Detail 1.It is mainly us   ed for large and medium-sized excavators. It is suitable for the conditions of the maximum pressure of 350 kgf / cm ^ 2 and the temperature of – 20 ℃ – 100 ℃ (the specification of cold area is – 40 ℃ – 90 ℃). Main Features 2.a. Small size, light weight and high strength: the material selection, processing technology and welding technology of the cylinder body and piston rod are adopted according to the strength, fatigue design and ad...

    • Lowest Price for Bolero Hydraulic Jack - Hydraulic Bottle Jack – Xinrun

      Lowest Price for Bolero Hydraulic Jack - Hydra...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Good Wholesale Vendors Gooseneck Hydraulic Jack - Car Jack – Xinrun

      Good Wholesale Vendors Gooseneck Hydraulic Jack...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • factory Outlets for Top Link Hydraulic Cylinder - Piston Hydraulic Cylinder – Xinrun

      factory Outlets for Top Link Hydraulic Cylinder...

      Product Detail: 1.Hydraulic cylinder bore The cylinder bore will be choosed according to the work pressure, work temperature, work situation and other special requirements. 1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube. 1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc. 1.3 Surface Roughness:R0.16-0.32μm 1.4 Inside Chromating:If necessary,inside tube will be chromated. 2.Piston rod 2.1 Rod Material:35#,SAE1045(45#)...

    • Factory wholesale Power Pack Hydraulic Jack - Hydraulic Bottle Jack – Xinrun

      Factory wholesale Power Pack Hydraulic Jack - ...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...