• head_banner

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for High Pressure Hydraulic Cylinder , 2 Way Hydraulic Cylinder , Break Liner Price , Our merchandise are widely recognized and trusted by users and can meet up with continuously changing economic and social needs.
Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun Detail:

Product Detail

1.Structure of scissor jack
It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed.

2.Principle of scissor jack
The scissor jack is based on the geometric principle that the two waists of isosceles triangle do not change and shorten the bottom edge will raise the high line. It uses screw rod and nut to adjust the bottom edge of the upper and lower isosceles triangle to raise and lower the height. Just like the tool ladder in ordinary life, when the angle between the two arms of a ladder is smaller, the ladder will be higher. Similarly, the greater the angle between the two arms of a ladder, the lower the ladder will be. Scissor jack, also known as bracket jack, is light and fast, and it is a product attached to the car of major automobile factories in China. The utility model is composed of an upper supporting rod and a lower supporting rod made of metal plates. The cross section of the upper strut and the cross section of the lower strut at the tooth and its vicinity are rectangular with one side open, and the metal plates on both sides of the opening bend inward. The teeth on the upper and lower struts are made of metal plates bent on both sides of the opening, and the tooth width is larger than the thickness of the metal plate.

3.The purpose of scissor jack is suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity. As the shear Jack belongs to mechanical jack, there is no need to worry about the phenomenon of oil leakage, but also can be used horizontally.

4.Model of scissor jack

model Capacity(ton) Min.height(mm) Max.Height(mm) N.W(kg) QTY/CTN(pcs) SIZE(mm)
KJ006 0.6 45 345 1.6 10 375x100x70
KJ008 0.8 110 320 1.7 10 375x100x70
KJ010 1 105 350 1.9 10 375x100x70
KJ015 1.5 110 390 2.2 10 440x110x105
KJ020 2 100 470 2.1 10 440x110x105

Application

Scissor jack is a kind of classification of Jack. It is called scissors jack because of its structure and shape. Scissor jack is a kind of lifting equipment, which is mainly used to jack up and support cars with small tonnage such as cars. It is light and fast to use. It is more suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity.


Product detail pictures:

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun detail pictures

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun detail pictures

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun detail pictures

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun detail pictures

Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Manufactur standard Mobile Hydraulic Jack - Car Jack – Xinrun , The product will supply to all over the world, such as: Brunei, Nairobi, Bulgaria, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
  • With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Iris from Puerto Rico - 2017.09.30 16:36
    Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
    5 Stars By Sandy from Bandung - 2017.10.13 10:47
    Write your message here and send it to us

    Related products

    • Wholesale Double Acting Telescopic Hydraulic Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun

      Wholesale Double Acting Telescopic Hydraulic Cy...

      Product Detail Hydraulic flap is a kind of modern material unloading equipment. As long as it is backed up, it can automatically and directly unload materials. The unloading efficiency is very high and the dust is less. The dumper needs to start the hydraulic station motor to make the pressure arm rise to a high position, and then a fully loaded gondola car is pulled by the heavy wagon shunting machine, and it is located on the car supporting beam of the dumper. The back plate vibrator is pus...

    • 2020 Latest Design 50 Ton Hydraulic Press Cylinder - Piston Hydraulic Cylinder – Xinrun

      2020 Latest Design 50 Ton Hydraulic Press Cylin...

      Product Detail: 1.Hydraulic cylinder bore The cylinder bore will be choosed according to the work pressure, work temperature, work situation and other special requirements. 1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube. 1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc. 1.3 Surface Roughness:R0.16-0.32μm 1.4 Inside Chromating:If necessary,inside tube will be chromated. 2.Piston rod 2.1 Rod Material:35#,SAE1045(45#)...

    • Well-designed Hydraulic Cylinder Working - HSG01-E Series Hydraulic Cylinder – Xinrun

      Well-designed Hydraulic Cylinder Working - HSG...

      Product Detail HSG type engineering hydraulic cylinder is a double acting single rod piston type hydraulic cylinder, which has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffer device and various connection modes. It is mainly used in construction machinery, transportation, shipping, lifting machinery, mining machinery and other industries.    Research and Design 1.Our company has 6 engineers with 20 years, 40 years of...

    • New Arrival China Double Acting Hydraulic Cylinder - Loader Hydraulic Cylinder – Xinrun

      New Arrival China Double Acting Hydraulic Cylin...

      Product Detail 1.It is mainly us   ed for large and medium-sized excavators. It is suitable for the conditions of the maximum pressure of 350 kgf / cm ^ 2 and the temperature of – 20 ℃ – 100 ℃ (the specification of cold area is – 40 ℃ – 90 ℃). Main Features 2.a. Small size, light weight and high strength: the material selection, processing technology and welding technology of the cylinder body and piston rod are adopted according to the strength, fatigue design and ad...

    • Best Price for 50 Ton Hydraulic Cylinder - Piston Hydraulic Cylinder – Xinrun

      Best Price for 50 Ton Hydraulic Cylinder - Pis...

      Product Detail: 1.Hydraulic cylinder bore The cylinder bore will be choosed according to the work pressure, work temperature, work situation and other special requirements. 1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube. 1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc. 1.3 Surface Roughness:R0.16-0.32μm 1.4 Inside Chromating:If necessary,inside tube will be chromated. 2.Piston rod 2.1 Rod Material:35#,SAE1045(45#)...

    • Low price for Clevis Mount Hydraulic Cylinder - HSG01-E Series Hydraulic Cylinder – Xinrun

      Low price for Clevis Mount Hydraulic Cylinder -...

      Product Detail HSG type engineering hydraulic cylinder is a double acting single rod piston type hydraulic cylinder, which has the characteristics of simple structure, reliable operation, convenient assembly and disassembly, easy maintenance, buffer device and various connection modes. It is mainly used in construction machinery, transportation, shipping, lifting machinery, mining machinery and other industries.    Research and Design 1.Our company has 6 engineers with 20 years, 40 years of...