• head_banner

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Double Rod End Hydraulic Cylinder , 10 Foot Stroke Hydraulic Cylinder , Heavy Duty Hydraulic Cylinder , Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you.
Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun Detail:

Product Detail

1.Structure of scissor jack
It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed.

2.Principle of scissor jack
The scissor jack is based on the geometric principle that the two waists of isosceles triangle do not change and shorten the bottom edge will raise the high line. It uses screw rod and nut to adjust the bottom edge of the upper and lower isosceles triangle to raise and lower the height. Just like the tool ladder in ordinary life, when the angle between the two arms of a ladder is smaller, the ladder will be higher. Similarly, the greater the angle between the two arms of a ladder, the lower the ladder will be. Scissor jack, also known as bracket jack, is light and fast, and it is a product attached to the car of major automobile factories in China. The utility model is composed of an upper supporting rod and a lower supporting rod made of metal plates. The cross section of the upper strut and the cross section of the lower strut at the tooth and its vicinity are rectangular with one side open, and the metal plates on both sides of the opening bend inward. The teeth on the upper and lower struts are made of metal plates bent on both sides of the opening, and the tooth width is larger than the thickness of the metal plate.

3.The purpose of scissor jack is suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity. As the shear Jack belongs to mechanical jack, there is no need to worry about the phenomenon of oil leakage, but also can be used horizontally.

4.Model of scissor jack

model Capacity(ton) Min.height(mm) Max.Height(mm) N.W(kg) QTY/CTN(pcs) SIZE(mm)
KJ006 0.6 45 345 1.6 10 375x100x70
KJ008 0.8 110 320 1.7 10 375x100x70
KJ010 1 105 350 1.9 10 375x100x70
KJ015 1.5 110 390 2.2 10 440x110x105
KJ020 2 100 470 2.1 10 440x110x105

Application

Scissor jack is a kind of classification of Jack. It is called scissors jack because of its structure and shape. Scissor jack is a kind of lifting equipment, which is mainly used to jack up and support cars with small tonnage such as cars. It is light and fast to use. It is more suitable for mechanical maintenance, especially for car maintenance. It is stable and reliable with large bearing capacity.


Product detail pictures:

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun detail pictures

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun detail pictures

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun detail pictures

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun detail pictures

Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun detail pictures


Related Product Guide:

Our advancement depends over the superior machines, exceptional talents and continually strengthened technology forces for Factory wholesale Power Pack Hydraulic Jack - Car Jack – Xinrun , The product will supply to all over the world, such as: Morocco, Hongkong, Netherlands, We've been proud to supply our products and solutions to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
  • A good manufacturers, we have cooperated twice, good quality and good service attitude.
    5 Stars By Maxine from Hungary - 2018.09.21 11:44
    Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
    5 Stars By Hedda from Puerto Rico - 2017.11.29 11:09
    Write your message here and send it to us

    Related products

    • Best quality Long Stroke Hydraulic Cylinder - Piston Hydraulic Cylinder – Xinrun

      Best quality Long Stroke Hydraulic Cylinder - ...

      Product Detail: 1.Hydraulic cylinder bore The cylinder bore will be choosed according to the work pressure, work temperature, work situation and other special requirements. 1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube. 1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc. 1.3 Surface Roughness:R0.16-0.32μm 1.4 Inside Chromating:If necessary,inside tube will be chromated. 2.Piston rod 2.1 Rod Material:35#,SAE1045(45#)...

    • 2020 wholesale price Mining Machinery Hydraulic Cylinder - Loader Hydraulic Cylinder – Xinrun

      2020 wholesale price Mining Machinery Hydraulic...

      Product Detail 1.It is mainly us   ed for large and medium-sized excavators. It is suitable for the conditions of the maximum pressure of 350 kgf / cm ^ 2 and the temperature of – 20 ℃ – 100 ℃ (the specification of cold area is – 40 ℃ – 90 ℃). Main Features 2.a. Small size, light weight and high strength: the material selection, processing technology and welding technology of the cylinder body and piston rod are adopted according to the strength, fatigue design and ad...

    • High definition Motorcycle Brake Linings - Truck Brake Lining – Xinrun

      High definition Motorcycle Brake Linings - Tru...

      Product Detail 1.Weirun has a complete and scientific management system for automobile parts and components. Shandong weirun Auto Parts Co., Ltd. is recognized by the industry for its integrity, strength and product quality. Welcome friends from all walks of life to visit, guide and business negotiation. Our company is a professional friction material production company. The main products are various types of brake linings. It is suitable for all kinds of minitype, light and heavy-duty specia...

    • China wholesale Electric Powered Hydraulic Jack - Hydraulic Power Unit – Xinrun

      China wholesale Electric Powered Hydraulic Jack...

      Product Detail Hydraulic power unit is a micro integrated hydraulic station. It is composed of motor, oil pump, integrated valve block, independent valve block, hydraulic valve and various hydraulic accessories (such as accumulator). Compared with the conventional hydraulic station with the same principle, it has the advantages of compact structure, small volume, light weight, high efficiency, reliable performance, beautiful appearance, no leakage and low price. At present, this product has b...

    • 2020 Good Quality Dump Truck Hydraulic Cylinder - Excavator Hydraulic Cylinder – Xinrun

      2020 Good Quality Dump Truck Hydraulic Cylinder...

      Product Detail 1.Excavator series of double acting single bucket type hydraulic cylinder is used as reciprocating linear motion actuator in excavator hydraulic system. PC series hydraulic cylinder is a kind of excavator hydraulic cylinder product specially researched and manufactured by Komatsu and Kayaba technology of Japan. It has the characteristics of high working pressure, reliable performance, convenient installation and disassembly, easy maintenance and buffer device. All seals of this...

    • Top Suppliers Hydraulic Jack 80 Ton - Hydraulic Bottle Jack – Xinrun

      Top Suppliers Hydraulic Jack 80 Ton - Hydrauli...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...