• head_banner

Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our growth depends to the superior products ,great talents and repeatedly strengthened technology forces for Mini Hydraulic Jack , Hydraulic Dump Hoist , Vertical Hydraulic Jack , We, with fantastic passion and faithfulness, are willing to offer you with best services and striding forward with you to make a bright foreseeable future.
Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun Detail:

Product Detail

Hydraulic flap is a kind of modern material unloading equipment. As long as it is backed up, it can automatically and directly unload materials. The unloading efficiency is very high and the dust is less. The dumper needs to start the hydraulic station motor to make the pressure arm rise to a high position, and then a fully loaded gondola car is pulled by the heavy wagon shunting machine, and it is located on the car supporting beam of the dumper. The back plate vibrator is pushed by the hydraulic cylinder and leans to one side of the gondola, and the press arm falls down to press the two sides of the gondola. When the backup plate is up, the pressure arm is pressed, and the heavy car shunter arm has driven out of the dumper, the dumper starts to dump at normal speed.

0102 0103 0101
The rear turning hydraulic turnover equipment is mainly composed of cart traveling mechanism, tipping bucket mechanism, belt conveyor mechanism, belt conveyor rotating mechanism, belt conveyor luffing mechanism, chain bucket lifting mechanism, cab and metal structure, etc. The Chain Bucket Unloader uses the rotating chain bucket to lift the coal from the carriage to a certain height and then unload it on the conveyor belt. The belt conveyor will transport the materials to the remote ground conveyor belt, or throw the materials to the material yard. The working principle of crane traveling mechanism, lifting mechanism, belt conveying mechanism and tipping mechanism is the same as that of mldxs type.

1.The telescopic cylinder can used for hydraulic flap platform, hydraulic dumper, hydraulic shutter,  can lift 80-300 tons.

2.We can produce the cylinder according to your requirments, from one stage to 5 stages, the diameter from 100-300mm.

3.Working pressure from 16-25mpa.

Hydraulic Flap Telescopic Cylinder Hydraulic Flap Telescopic Cylinder

1.all-round 360 production line cutting group stop workflow, enabling automatic tube feeding, automatic feed, automatic cutting, automatic transmission operation.
2.Using KASRY Nesting programming system as a major programming tool, the software programming platform AUTOCAD basic, simple, graphical and intuitive, feature-rich, it can greatly improve operational efficiency.
3.High-end three-dimensional flexible robotic cutting applications, to achieve bevel cutting function, the pipe and the torch using the servo positioning function .

Application
Hydraulic Flap Telescopic Cylinder Hydraulic Flap Telescopic Cylinder Hydraulic Flap Telescopic Cylinder


Product detail pictures:

Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun detail pictures

Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun detail pictures

Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun detail pictures


Related Product Guide:

With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for Europe style for 100 Ton Hydraulic Press Cylinder - Hydraulic Flap Telescopic Cylinder – Xinrun , The product will supply to all over the world, such as: Japan, Singapore, Guatemala, Customer's satisfaction is always our quest, creating value for customers is always our duty, a long term mutual-beneficial business relationship is what we are doing for. We are an absolutely reliable partner for yourself in China. Of course, other services, like consulting, can be offered too.
  • This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Dominic from Sevilla - 2017.01.11 17:15
    The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Nicci Hackner from Rotterdam - 2017.01.28 19:59
    Write your message here and send it to us

    Related products

    • Super Lowest Price Vertical Hydraulic Jack - Hydraulic Bottle Jack – Xinrun

      Super Lowest Price Vertical Hydraulic Jack - H...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • One of Hottest for Hydraulic Farm Jack - Car Jack – Xinrun

      One of Hottest for Hydraulic Farm Jack - Car J...

      Product Detail 1.Structure of scissor jack It consists of a base, a pair of lower supporting arms, a pair of upper supporting arms, saddles, plane bearings, nuts, cradle, pin shaft and screw rod. The edges of a pair of upper supporting arms are turned inward into stiffeners, and their ends are formed into gears and meshed; the edges of a pair of lower supporting arms are turned outward into reinforcing ribs, and the ends are formed into gear wheels and meshed. 2.Principle of scissor jack The ...

    • Factory Cheap Scissor Lift Hydraulic Cylinder - Piston Hydraulic Cylinder – Xinrun

      Factory Cheap Scissor Lift Hydraulic Cylinder -...

      Product Detail: 1.Hydraulic cylinder bore The cylinder bore will be choosed according to the work pressure, work temperature, work situation and other special requirements. 1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube,forged tube. 1.2 Tube Material: SAE1020(20#) , SAE1045(45#) ,16Mn(Q345B),27SiMn,etc. 1.3 Surface Roughness:R0.16-0.32μm 1.4 Inside Chromating:If necessary,inside tube will be chromated. 2.Piston rod 2.1 Rod Material:35#,SAE1045(45#)...

    • Excellent quality Inner Pack Hydraulic Jack - Hydraulic Bottle Jack – Xinrun

      Excellent quality Inner Pack Hydraulic Jack - ...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Hot sale Hydraulic Power Jack - Hydraulic Bottle Jack – Xinrun

      Hot sale Hydraulic Power Jack - Hydraulic Bott...

      Product Detail The working principle of the hydraulic jack is that the wrench drives the small piston upward. The oil in the oil tank is sucked into the lower part of the small piston through the oil pipe and one-way valve. When the wrench is pressed downward, the small piston is blocked by the one-way valve. The oil in the lower part of the small piston is pressed into the lower part of the large piston through the internal oil circuit and one-way valve, and the lower part of the small pisto...

    • Factory wholesale 2 Stage Hydraulic Cylinder - Loader Hydraulic Cylinder – Xinrun

      Factory wholesale 2 Stage Hydraulic Cylinder -...

      Product Detail 1.It is mainly us   ed for large and medium-sized excavators. It is suitable for the conditions of the maximum pressure of 350 kgf / cm ^ 2 and the temperature of – 20 ℃ – 100 ℃ (the specification of cold area is – 40 ℃ – 90 ℃). Main Features 2.a. Small size, light weight and high strength: the material selection, processing technology and welding technology of the cylinder body and piston rod are adopted according to the strength, fatigue design and ad...